I am currently working with vpro, trying to develop a program to control PCs using AMT, but I don't currently own any PC with a vpro chip, can I simulate AMT and KVM on a virtual machine?
↧
Is it possible to simulate vpro in a virtual machine?
↧
Mesh Commander (Remote Desktop works over LAN only)
Hi,
I am using Mesh Commander 0.5.7 for Mac. I can connect over LAN and use the "Remote Desktop" feature with no problem, however when trying to connect using public IP, despite being able to connect and view system status, hardware information etc., when I try to use "Remote Desktop" it displays connecting, but never connects.
Am I missing something? It works over LAN so not sure why it does not work the same over public IP despite a successful connection - I wonder, is there a different port for the "Remote Desktop" function and I need to forward that also?
I have also tried this on a Windows PC, but no luck.
Thanks,
Matt
↧
↧
Intel AMT and VLAN Configuration
Is it possible to configure a VLAN for the Intel AMT Network Interface?
I'm using the Intel Manageability Commander Version 1.0.8 and AMT Version 11.7.0
Thanks
↧
What's different between Non Vpro and ME disable configuration?
What's different between Non Vpro and ME disable configuration?
Can I say Non Vpro=ME disable ?
If not , what's different?
Thanks~!!
↧
Can't install Intel driver support assistant
Once Its downloaded I click on the file a window pops up and says "are you sure you want to uninstall this product". anybody heard of this?@
↧
↧
Either the user name was not recognised
Hi!
I have Q170 Intel chipset and was able to use remote control through AMT capabilities. It has been working for just a few months and then stopped. I got the message "Either the user name was not recognised, or the password was incorrect". I didn't forget password. I was able to use "incorrect" password to open AMT bios properties. I just turned off AMT in BIOS and turned it on again. Remote control function was returned back and I was able to use it during the next few months but I lost control and now I have the message about incorrect password again. I beleive I can use the same way to restore control as I've got permanent work. Can someone explain me what has happened and how to fix it? I've bios updated through the latest vendor software
↧
Static IP address in SCS console while client's IPv4 Ethernet addresses keep changing
I'm a system admin and had the task to configure the MEBx PW of our vPro clients.
Using SCS on a W2012R2 VM in DB mode (SQL2014 Express), all my clients are configured in 'Admin Control Mode'.
For newly configured clients, the remote admin PW can be retrieved from the DB. All of this works very well indeed.
Now I want to find out how I can take advantage of the AMT features.
My problem at this point: as the (internal) IP address of my clients changes, the console's 'Get configured password' function becomes a bit of a lottery. Typically it fails and the client's 'Connection Status' changes to 'Disconnected'.
My question: I suspect that my SCS console's inability to keep up with the ever changing IPv4 Ethernet port addresses of my clients is part of the problem?
Can anybody confirm this?
The (Lenovo) clients:
- Win10 x64 1703, BitLocker=ON
- The BIOS is up to date
- The IntelME firmware is up to date
- We have a disjoint DNS name space. I.e. the SCS server's name space is different from the client's.
- DNS resolution from SCS server to client and client to server works
- The errors I'm getting:
Finishing Get configured password for UUID:E8DD1901-5472-11CB-9746-BD924F82E988, With returned status: Initial connection to the Intel(R) AMT device failed. (0xc00007d2). A TCP error occurred. Make sure that the destination settings are correct and that a network connection exists to the target. (0xc000521c).
If there's anybody out there who can give me a hint, I'd be very grateful.
Martin
↧
IMSS configuration
I would like to control the user notifications settings in the IMSS (Intel Management and Security Status) utility.
How can this be controlled during or after an automated installation process?
Martin
↧
Looking into remote management solutions for NUCs
Hello All,
I work at Wayfair within IT and we've bought a large amount of Intel NUCs for our environment. I would like to speak to a specialized tech member who can help me with the following:
Is there a way to remotely push BIOS updates to all of our deployed Intel NUCs?
Is there also a way to collect the amount of NUCs and how many of each model type that are currently deployed on our network? I'm wondering if there are tools available to use with SCCM or other platforms?
Please let me know!
Regards,
Ryan
↧
↧
When Zero Touch Provisioning fails...
we have a 3rd party management system which uses certs for zero touch provisioning. This works mostly, but if it doesnt there is a real lack of troubleshooting information on what happened.
Can anyone advise if logs are kept anywhere on the client from an Intel point of view around reasons for provisioning failures ? or what is the best troubleshooting process ?
↧
why my AMT USB Provisioning cannot work?
why my AMT USB Provisioning cannot work? it always boot to OS.
↧
MEManuf Test Fail
Ran "MEManufWin64 -s0 -verbose"
Error 173: Communication with WLAN device failed
Error 117:MEManuf Operation Failed
The wireless is install correctly,driver OK.
↧
MEManuf Test Fail
ME Test：
Command："MEManufWin64 -s0 -verbose"
Error 173: Communication with WLAN device failed
Error 117:MEManuf Operation Failed
The wireless is install correctly,driver OK，
I can PASS by changing the wireless network card,is it related to the network card support Vpor?
The wireless card used is intel Centrino@ Advanced-N 6235
↧
↧
Issues after updating firmware 1.13 on intel server
I am having issues after updating firmware 1.13 on intel server - cannot disable/enable dhcp?
↧
IPT enterprise PKI solution?
Hi there,
I have been asked to implement a PKI solution for a customer using the Identity Protection Technology of Intel VPro.
We have an own Java CA on a Linux server and need to generate certificates signed by our CA for authentication, as well as e-mail encryption keys which also must be stored in the CA as a backup.
The Intel IPT documentation only advises to use their own IPT CA on a Microsoft server, but this does not match our environment.
The IntelJCE documentation Providing Hardware-based Security to Java* Applications by leveraging Intel® Identity Protection Technology and Java Cry… also seems to be insufficient for this use case.
So is there any way to implement this solution and where can I get the complete interface description?
Regards
Sandra
↧
Operating system lockup or power interrupt events in AMT
We have about 1000 HP EliteDesk 800 G2 SFF machines and about 30% of them have a lot of events in AMT event log: Operating system lockup or power interrupt. It is logged on every time after restarting Windows 7 OS system. In Windows event logs all looks ok - no errors connected with these restarts. How to troubleshoot this? I google for this but cannot find any information which allows me to resolve this problem. I found e.g. AMT event log error where someone mention https://www.dmtf.org/sites/default/files/standards/documents/DSP0136.pdf but I cannot conclude anything from this. Below screen from one of our AMT events
AMT version v11.0.22 activated in Admin Control Mode (ACM)
Newest BIOS installed N01 Ver. 02.29
↧
Expired TLS certificate.
Hi All,
The TLS certificate that I was using in my configuration expired. It was then renewed but not when connecting to clients it shows as invalid but still connects. When you download the certificate it has the new expiry dated. I have tried un-configuring and re-configuring the client but it made no difference. I tried creating a new profile and configuring with that. I also tried running a maintenance task on one of the clients. any suggestions on what to do next? create a new certificate and reconfigure all machines?
Cheers,
Ross
↧
↧
SCS 11.2 & manageability commander 2.0.216 issue
after upgrading manageability commander from 1.8 to 2.0.216 the MC button in SCS 11.2 is greyed out and will not launch the manageability commander? also if i manually add a client in manageability commander i get this error when trying to connect "imcException - Timeout Error" to clients that were working fine in the previous version.
↧
HP ProDesk 600G3 With AMT Provisioned No UEFI PXE Boot possible with Bios>2.06
Hello,
We have a problem with the HP ProDesk 600G3.
With the default Bios version (version 2.06) and AMT Provisioned Everything works fine.
| 00.02.06 Rev.A | 18.3 MB | Jul 3, 2017 |
Due to Meltdown and Spectre we are updating our machines. And After the bios updates it seems that we can't use UEFi PXE boot anymore.
We have tried every bios version higher then 00.02.06 Rev. until version 2.16a released on Apr 11, 2018.
The situation stays the same.
We use one AMT Profile for all our desktop computers and only the HP ProDesk 600G3 has this problem.
Other systems: Dell Optiplex 7010 (SFF), Dell Optiplex 9020 (SFF) and Dell Optiplex 7040 (SFF) are working fine.
HP business support can't find the reason.
The only way at this moment to make UEFi PXE boot working again is to unprovisioning the AMT profile.
This keeps working until the AMT profile is automatically pushed to the system agian.
Is this a known error?
Can someone explain why this is happening and how to solve this problem?
↧
Intel Dual Core Technology doesn't work properly.
Hi, my intel dual core proccer is not functioning right. Is it damaged or broken. Even my writing is slowwing down.
Please reply,
Your friend Ishraq
↧