AMT Firmware 5.2 Set-AmtAlarmClock Module error
When trying to set the AMT Alarm clock on a 5.2 system, using an SCCM task sequence, I receive the following error. This task sequence works fine on AMT 6.0 and above systems. I have been struggling...
View Articlefalse(?) lockup notification in logs
I am currently testing vPro with SCS installed on my non-vPro desktop and a single Latitude E6530 as my vPro machine.The AMT event log shows a "operating system lockup or power interrupt' about every 2...
View ArticleIntel DQ45CB fan problems
The cpu fan will not go over 1k rpm even under heavy loads. I cannot find QST or any kind of fan control option in the bios that changes this. I am pulling my hair out here. Suggestions? Thanks
View ArticleNUC i5 vPro problems
Hi there! I just purchased an Intel NUC with the i5 ivy bridge chipset. Specifically, DC53427HYE. The most interesting aspect of this device to me is the Intel AMT feature. I verified that this NUC...
View ArticleAMT management via USB3->RJ45 interface?
Hello,I'm using a NUC DC53427HYE to remotely control a Gige IP camera on Linux (Debian Wheezy).The camera is correctly detected only if it is directly plugged in the integrated Intel ethernet card,...
View ArticleI bought Toshiba Satellite Pro S850-X0430 in india. Is it have vPro technology?
Other details Part NumberPSSETG-01E00HModel IDS850-X0430 PROCESSORProcessorCore i5 (3rd Gen)Variant3320MChipsetMobile QM77 ExpressBrandIntelClock Speed2.6 GHz with Turbo Boost Upto 3.3 GHzCache3 MBHow...
View ArticleIssues with provisioning AMT in SCCM 2012 R2 - systems previously provisioned...
ningintelHi - running into issues with reprovisioning some systems for Out of Band in SCCM 2012 R2 that were previously provisioned in SCCM 2007 R2. I ran through the process of unprovisioning the...
View ArticleQuestion on integrating SCCM 2012 R2, SCS 9.0 and SCCM Add-on
We've just migrated our AMT 7.1 clients to a brand new SCCM 2012 R2 server. We'd like to configure our OOB AMT settings to now use the SCCM Add-on along with SCS 9.0. This seems to be a much better...
View ArticleSSL Handshake Failed, Unknown CA
Hello, Just built a new Intel SCS server and installed the SCS Add-on on the SCCM 2012 server in production after having success in my test environment and now when I try to manually provision an AMT...
View ArticleProblem provisioning AMT Version 5.0.1 and earlier
Hello around. We managed to set up our OoB Managment with SCCM 2012 SP1 on a Windows Server 2012 some time ago.Now we got a little problem, perhaps someone can point me the right direction.I can...
View ArticleAMT Firmware 5.2 Set-AmtAlarmClock Module error
When trying to set the AMT Alarm clock on a 5.2 system, using an SCCM task sequence, I receive the following error. This task sequence works fine on AMT 6.0 and above systems. I have been struggling...
View ArticleINTEL SCS Configuration
Hello, I am working on a project where my company is trying to get the SCS application working on our clients network. So far the experiment is in futility. I have managed to install the SCS Console,...
View ArticleAMT 6.2+ host based config issue
I have multiple client machines(HP DC8100 and DELL 790) with AMT 6.2 and above. I'm getting the following failures when trying to use host based configuration on both the 6.2 and 7.0 firmwares. My...
View ArticleDG41RQ mainboard installing drivers problem.
Hi everybody,For the last two days im getting crazy because i needed to format my computer and now i cant install any drivers, apart from that winzip and winrar, each time i click on the drivers icons,...
View ArticleClik here to view.
IntelSCS Upgrade Issues v8.2.0.19 -> 9.0.23.10 / 0xc000028f
Hi. I have some serious issues when upgrading to latest SCS. While the upgrade process itself performed good (also the database upgrade completed without errors) I have 2 huge issues: 1. SCS Console...
View ArticleIntel SCS and SCCM task sequences permanently stuck on client
I have an RCS server integrated with SCCM. It is largely working. However, on some number of SCCM clients, the Intel SCS task sequences get stuck in an "Installing" state forever, preventing any...
View ArticleIntel NUC I5-4250U processor AMT Ctrl-P - not working
I have the Intel NUC with the I5-4250U and cannot get into the MBEx with Ctrl+P combo. F2 etc. are fine. How do I get in to configure password ? How do I set an IP address ? I load ESXi and it has a...
View ArticleRemote KVM with SCCM 2012 R2 step by step guide?
I'm new to SCCM and vPRO AMT so I'm overwhelmed with things I would like to accomplish before the deadline that was set for me.I’ve got the SCCM down pretty good, now I would like to enable remote KVM...
View ArticleTrying to configure Remote configuration, almost there...
I have successfully provisioned a test machine (Dell OptiPlex 990, AMTv7.1) by entering the MEBX and choosing the option "Activate Network Access". I cannot seem to provision this machine with either...
View ArticleError: Can NOT get OTP from target device.
Our environment is SCCM 2007 R2 SP3, we have been provisioning without issue for years. We have just received new hardware, HP EliteDesk 800 G1, BIOS version L01 v02.21 (latest), ME firmware version...
View Article